Mercury Getter Firing for the Other Lamp including CCFL and FFL Manufacturing
- This is a process to heat the getter
in order to extend the filament in
the seamed glass tube of the TV
Braun tube and fluorescent lamp
and to completely remove the
remaining gas.
- At this time, make the inside of the glass
tube into a high-degree
vacuum by the high frequency induction
heating to this part
by inserting the Getter coated
with barium, having strong chemical
attraction to oxygen and nitrogen.
In addition, it is applied to a process
to maintain the inside of the
tube with the high-degree vacuum by
removing the remaining gas disturbing
the electron flowing.
- For the Getter Flashing by using the high
frequency induction heating,
heat the Getter part of the inside
of the glass tube at 900~1200¡É
within 25~30 seconds by using
the RF Power around certain KW without
any contact by using the external
inductive coil to evaporate.
-
Put into the certain amount of mercury Gas
and the minimum amount
of mercury Gas.
- Improve the productivity by the automated
process
- Completely isolate the noise, the problem
of the M frequency device.
- Extract more than 30~70% of mercury compare
to the similar devices
in the world.
-
R/F Generator & Control Panel
- Working Coil Head
- Chiller (option)
